22 replies to this topic

[FlaHP]

Anyone remember about 3 years ago the Pro Glass roll pans?

Well mine has been sitting in the closet for almost 2 years and was begging to be installed.






After a few hours of tweaking here and there its loose fit. The center piece is over sized and will need a bit more grinding.



Its a real shame these never made it to market. The quality seems really nice.

I will have the center sized and fit in the next few days and then I can get it and a few other things painted.

[Screaming01L]

looking good

[BlackSS]

Looks good. I've always liked roll pans on trucks. Who's painting it?

[FlaHP]

Looks good. I've always liked roll pans on trucks. Who's painting it?

Not sure. If Matt thinks he can then I will pay him.

[FlaHP]

Typhoon43/Josh and I hammered out some more tonight

Swapped out the Hotchkis Springs

for

JDM cut drag springs and QA1 shocks for the front









OK tip one for the QA1 shock in the front. Grind the stud down to the nut and then turn the shock mount 90 degrees and press while turning the mount slowly with a wrench. It made a huge difference.

Lots more on the way

ABS delete
Lighten the front bumper supprt
Lexan rear window
Kirkey seats
More fuel system work
Rewire N20

[Screaming01L]

hopefully the weather breaks. This heat is eating me up, 10 hours in it durring the day, and im dead for wrenching

[FlaHP]

hopefully the weather breaks. This heat is eating me up, 10 hours in it durring the day, and im dead for wrenching

Yea its tough to get motivated but you know how fast Nov 1 is coming?

Too much to do and get worked out by then.

[Chili]

That rollpan looks like shit. Let me know if you want me to come up there and take it to the dump for you

What are you doing with your hotchkis springs???

[FlaHP]

That rollpan looks like shit. Let me know if you want me to come up there and take it to the dump for you

What are you doing with your hotchkis springs???

Yea thats a very loose fit. It does need some help though.

I think Josh is gonna use the Hotchkis. I will let ya know if he passes. I most likley will sell it as a set since I have the Hotchkis Bilsteins as well.

[Typhoon43]

Yea thats a very loose fit. It does need some help though.

I think Josh is gonna use the Hotchkis. I will let ya know if he passes. I most likley will sell it as a set since I have the Hotchkis Bilsteins as well.

I BLED FOR THOSE SPRINGS. MINE MINE MINE!!!!!!!!!!

[dbdragger]

jason let me know whenever you want to work on the truck, Im down. B/c I know when Im able to start working on the SRT-8 you will be out at the shop to help me. All I currently do is work and go home, and dana loves talking to Traci, so just let me know when you want to work on it, just give me a call!

[FlaHP]

jason let me know whenever you want to work on the truck, Im down. B/c I know when Im able to start working on the SRT-8 you will be out at the shop to help me. All I currently do is work and go home, and dana loves talking to Traci, so just let me know when you want to work on it, just give me a call!

Will do.

I will wrench any day on the srt.

[FlaHP]

AEI-12301 Fuel Filter, Inline Mount, Red, 10 Microns, -10 AN Female Inlet/Outlet, Each $81.95 1 $81.95

Shipping From: McDonough GA Delivery: 2 to 3 business days

AER-FBM1514 Fitting, Hose End, AQP Socketless, Straight, -10 AN Hose Barb to Female -10 AN, Aluminum, Red/Blue, Each $7.95 1 $7.95

Shipping From: McDonough GA Delivery: 2 to 3 business days

AER-FBM1534 Fitting, Hose End, AQP Socketless, 90 Degree, -10 AN Hose Barb to Female -10 AN, Aluminum, Red/Blue, Each $19.95 1 $19.95

Shipping From: McDonough GA Delivery: 2 to 3 business days

AER-FBM2410 Fitting, Flare Reducer, Female -8 AN to Male -6 AN, Steel, Yellow Dichromate, Each $10.39 1 $10.39

Shipping From: McDonough GA Delivery: 2 to 3 business days

AER-FBM2916 Fitting, Coupler, Straight, Female -8 AN to Female -8 AN, Aluminum, Blue, Each $8.88 1 $8.88

Shipping From: McDonough GA Delivery: 2 to 3 business days

AER-FCN1020 Hose, AQP Socketless, Rubber, Black, -10 AN, 20 ft. Length, Each $76.95 1 $76.95

Shipping From: McDonough GA Delivery: 2 to 3 business days

MEZ-WIK346 Relay, Water Pump, 30 Amp, Single Pole, Wiring Harness Crimp Connectors, Each $45.69 1 $45.69

Shipping From: McDonough GA Delivery: 2 to 3 business days

MEZ-WP12034B Fitting, Straight, -12 AN Male to 3/4 in. Hose Barb, Aluminum, Blue Anodized, Each $16.95 2 $33.90

Shipping From: McDonough GA Delivery: 2 to 3 business days

MEZ-WP136S Water Pump, Electric, 20 gpm, Billet Aluminum, Black Anodized, Remote Mount, Each $189.99 1 $189.99

Shipping From: McDonough GA Delivery: 2 to 3 business days

PRF-30131 Relay, Fuel Pump, 40 Amp, Double Pole, Universal, Kit $46.95 1 $46.95

Shipping From: McDonough GA Delivery: 2 to 3 business days

RUS-650420 Fuel Block; Billet Y Block w/AN Port; AN Size -10 Inlet; AN Size -10 Outlet; Blue Anodized $21.69 1 $21.69

Shipping From: Tallmadge OH Delivery: 3 to 4 business days

RUS-660360 Fitting, Coupler, Straight, Male -8 AN to Male -8 AN, Aluminum, Blue, Each $5.95 2 $11.90

Shipping From: McDonough GA Delivery: 2 to 3 business days

SUM-220162B Fitting, Straight, Male -8 AN to Straight Cut Male -10 AN O-Ring, Aluminum, Black Anodized, Each $9.95 2 $19.90

Shipping From: McDonough GA Delivery: 2 to 3 business days

[Screaming01L]

WOW, you know Monday is supoposed to be nice and cool . Maybe come down. Fuel hat might be here by then also!

[BlackSS]

I could make a Monday wrenching day.

[FlaHP]

Sounds good Monday works for me.

Would like to get Daves truck taken apart as well.

[Screaming01L]

Sounds good Monday works for me.

Would like to get Daves truck taken apart as well.

Im thinkng about having some traction bars made. Or mod mine. id likke to put a heim joint on one end to preload the rear a bit.

[FlaHP]

Im thinkng about having some traction bars made. Or mod mine. id likke to put a heim joint on one end to preload the rear a bit.

Please dont cut yours. They are waaay to nice.

Yea you do need to redo that. I had no idea it was binding so bad

[dbdragger]

Im also off on monday, and could join in as well. Call me J and let me know!

[FlaHP]

Im also off on monday, and could join in as well. Call me J and let me know!

Its gonna happen for sure.

If Josh is 100% I will ride back with him. You can ride down with me if ya want.

I came by you work today but didn't see ya outside and was in a hurry.